carbonsuppliers.com

BOYCE ACTIVATED CARBON SOLUTIONS FOR REFINING INDUSTRIES

admin — Fri, 06 Apr 2012 06:02:12 +0000

Boyce is uniquely equipped to supply a full range of activated carbon products

for variety of applications in refineries. We currently supply best quality of Granular and powder activated carbon for dozens of refineries, offering prompt, expert service. Regulatory compliance and the desire to improve product quality are key drivers for the use of activated carbon in Refineries.

The following discussion highlights these common applications and the solutions that Boyce Carbon can supply.

VOC Treatment & Control

Compliance with either the Benzene National Emission Standard for Hazardous Air Pollutants (NESHAP) regulation or local air emission regulations drives the need for VOC control at several emission points within the refinery, including:

v Sewer pumps / junction boxes

v Covered API separators and DAF units (level changes and diurnal breathing losses) Vacuum truck exhaust

v Wastewater and storm water storage tanks (level changes and diurnal breathing losses)

Boyce activated carbon grades are particularly designed for these applications to be used in carbon adsorption units.

Vapor / Solvent Recovery

Activated carbon is often used in systems designed for the recovery of economically valuable products (gasoline vapors, benzene, and solvents) at refineries and terminals. Both pressure swing (for gasoline vapors) and temperature swing (for benzene and solvents) designs are commonly used. In this application, Boyce special grades of activated carbons with high working capacities allows for effective adsorption and desorption through numerous cycles.

Hydrogen Sulfide Removal

The processing of sour crude oil often results in the formation of hydrogen sulfide (H2S) at various points in the refinery. Activated carbon is a common technology to control the nuisance odors and corrosion issues that often result from H₂S. Boyce Specialty grades of carbon are often used to enhance the H₂S capacity.

Amine Purification

Various alkanolamines are used by refineries to purify gas streams by removing acid gases such as CO₂, H₂S, and COS. During this process, the amine solution picks up hydrocarbons and organic acids. Activated carbon is utilized to treat a slipstream of the amine solution to prevent buildup of these hydrocarbons, and provides several benefits to the refinery:

v Improved amine scrubbing efficiency

v Reduced corrosion rate

v Reduced operating costs

Decolorization

Boyce Activated carbon is the perfect choice to remove unwanted color or other organic impurities from desired end products such as jet fuel, kerosene, gasoline, lube oil, and other products.

Boyce Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. It gives the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continuous adsorption process and offer unusual economy in cases where carbon regeneration is favorable.

Specification of our main grade of granular activated carbon for refining industry is given as under. We can customize the iodine value as well as the particle size according to your requirements.

Technical Specification of Boyce Granular Activated Carbon

Properties	Specification
Raw Material	Coconut shell charcoal
Appearance	Black granules
Particle Size	Any sieve size
	4/8, 8/16, 8/30
	8/50, etc
Bulk Density	0.55±0.05 gm/cc
Carbon Tetra Chloride Adsorption	30%
Iodine Adsorption mg/gm	500mg/gm±25
Total Surface Area (min)	500 m²/gm
Ball Pan Hardness No.	95
pH	9 to 10
Ash Content	5% Max
Moisture	5% Max

The Greener side of Carbon

admin — Sat, 03 Mar 2012 07:14:35 +0000

Innovation for sustainability, Innovation is the act or process of inventing or introducing something new, and it is more than just research.
It is the need to be complemented by other elements in order to really become an innovation. Innovation or the ‘turning of good ideas into competitive solutions for society’ is an investment which only competitive industries are able to accommodate. Sustainability, is the ability to be maintained, and needs to be kept alive without being overlooked. The triangle of sustainability acts on three pillars; economic, social and environmental.
At Boyce Carbon we constantly fsund research projects that lead to innovation; innovation to increase the life of our resources like water and air. Innovation for sustainability works hand in hand, like the sun and water for the growth of nature. At Boyce, we constantly seek to explore the green side of carbon, to innovate for sustainability. Boyce Carbon is a company into sustainability based solutions and products. We work towards identifying and procuring carbon based products that are used across industry like food processing, pharmaceutical, water management and treatment, chemical and other industry applications.
We source from the optimal sources with a technical orientation on the product. The sourcing is done from the best sources networked across Asia, India, Srilanka, Philippines, Indonesia and Malaysia. Our comprehensive product range includes activated carbon and coconut shell based products.
COCONUT SHELL IS MORE EFFICIENT
Activated carbons produced from coconut shells typically have a tighter, more micro porous pore structure than their coal-based counterparts. This is due to the inherent pore structure of the raw material coconut shell as compared to raw material coals. This micro porosity lends itself towards certain applications where activated carbon is used. Also, coconut shell-based carbons tend to be harder, more resistant to abrasion, and lower in ash than similar grades of coal-based carbons. A quick comparison of standard specification measures on coconut shell carbons versus coal carbons is as follows: A complete range of premium virgin activated carbons made from high quality coconut shell charcoal, and Coconut Shell Charcoal in granular and powder forms are available in the form of Coconut Shell Cakes, Desiccated Coconut, Coconut shell charcoal Briquettes, Coconut Shell Charcoal Granules, Coconut Shell Charcoal Lumps, Coconut Shell Charcoal Powder, Coconut shell powder, Coconut shell chips, etc. The company has been certified for ASNI/NSF, Standard 61 and ISO 9001 and satisfies the requirements of the Food Chemical Codex.

Activated Carbon Adsorption and How it Works

admin — Sat, 04 Feb 2012 07:03:03 +0000

Activated Carbon Adsorption and How it Works
There are many uses of carbon adsorption technology in chemical industry. Adsorption is a process where a substance sticks to the surface of a solid to remove a soluble substance from water or air. Activated carbon is an adsorbent for removing pollutants and organics from both air and water. It is mainly used in the purification of drinking water, de-chlorination of ground water and polishing of treated effluent.
Activated carbon is a highly permeable filtering material with immense surface area. It has special connection to organic materials such as solvents used in printing inks and ordinary coatings. It can be made from materials such as coal, wood, and coconut shells because of the large size of their surfaces and the permeable nature of its pores. The bigger pores helped to longer the activated carbon functions. The material which has selected to be used as activated carbon must undergo an oxidation process. The dehydration and carbonization process involves the slow heating of the material at high temperatures. The carbon material is activated to density and hardness with the help of other oxidizing substances like chemicals or gases.
To determine the breaking point, the activated carbon undergoes a number of tests. Breaking point is important in chemical processes as it is the time when the activated carbon begins to lose its adsorbent quality. The point helps the user to know when the activated carbon needs to be replaced and reactivated. The process of adsorption has three stages. When the activated carbon placed in the water, the polluted substances started to stick to the carbon first. Then the polluted matter started to move into the big pores. Finally it adsorbed to the inner surface of the carbon.
How activated carbon works
Activated carbon has the filtering capacity that suck contaminants from water and gases like a sponge. The benefit of adsorption is that it does not create a chemical reaction between the carbon and the pollutants. But it may create some reaction during the filtering process due to the presence of oxygen and hydrogen atom sticking to the surface of carbon molecules.
The success of the activated carbon filtration method depends on the source and nature of the carbon source. The strength of the carbon source is important in filtering as the walls of the carbon pores must resist the pressures generated by the filtering process. In the filtering process, two mechanisms are working at the same time. Particles of contaminants are adhered to the pores of the activated carbon first. The available surface area and the pore size are important in the filtering process. In the second mechanism, the contaminants held against the walls of the pores by the force that exists in the molecules of like substances.
In simple words, activated carbon adsorption taken place to the exterior of the activated carbon first and then it move to the carbon pores and finally adsorb to the interior walls of the carbon. Adsorption capacity of the activated carbon decreases over time and it will need to be reactivated or replaced.

Why should you look at buying activated carbon and charcoal from India?

admin — Mon, 12 Dec 2011 12:54:32 +0000

Well, first of all one should know what activated carbon actually is. It is an eco friendly water treatment medium, which is found in granulated, block, or powdered form, produced by heating carbonaceous materials, such as coal, wood, or coconut shells, in the absence of air, creating a highly porous adsorbent material. Mostly coconut shells are used for this process.

Coming to why activated carbon from India. It is a well known fact that India is the largest producer and exporter of coconut and coconut based products in the world. India is also the 3^rd largest producer of coal. Here in India, there are 12 major ports and 135 minor ports which are so well connected by a road system that it makes it very easy for transportation.

The Government of India considers the exports of coconut shell products so important that they have a department dedicated to promote export of coconut shell products. Indian companies, a minimum of at least 100 manufacturers make activated carbon from coal and coconut shell as per specifications of the customer, exporting around 25000 tons of activated carbon and importing 1000 tons of activated carbon every year. India also has an excellent relationship with countries like Sri Lanka, Malaysia, Indonesia and The Philippines etc, who are also major coconut producing countries.

Coming to the global scenario here, the demand for activated carbon is around 0.50 million tones per annum with a global growth rate of 2 to 3% per annum. The wood based activated carbon accounts for about 40% of the total production in the world. Cost advantages can be obtained for both coconut shell and coal-based activated carbon.

Why Boyce Carbon?

Boyce Carbon, a company doing business in Southeast Asia exporting activated carbon and coconut shell charcoal.

Have a pristine network of sourcing to countries like India, Sri Lanka, The Philippines, Indonesia, Malaysia, and Vietnam etc.

Technical staff who can offer hands-on guidance in selecting the most appropriate system, operating conditions and carbon to meet your needs.

Supplies activated carbon to major municipal corporations like The Dubai Municipal Corporation, major Parma companies, waste water management and processing companies in the world.

Has stockiest in major locations in the Middle East and Europe

Can provide consistent delivery throughout the year.

Has 12 years of experience in supplying activated carbon and charcoal.

On your Activated carbon requirements please call +91 9842091301
Email: boycecarbon@gmail.com. Visit: www.carbonsuppliers.com

Boyce have learned to control adsorption capacity on gold recovery

admin — Thu, 08 Dec 2011 07:39:54 +0000

Use of chars in gold recovery began in the late 1800s. The 1930s and 1940s were periods of experimentation in North America, resulting in new or improved approaches for carbon use, both in pulverized and granular form. A major breakthrough was reported by J.B.Zadra of the US Bureau of Mines in 1950. He demonstrated that adsorbed gold and silver values could be desorbed from the carbon by low cost procedures, thereby allowing the carbon to be recovered and recycled to the adsorption circuit.

The carbon-in-pulp (CIP) process for gold recovery has now been in use for more than a decade. Based on this experience, carbon companies and metallurgists are addressing several of the early concepts about the selection and performance of the activated carbon, particularly as they relate to soluble gold loss and/or subsequent efforts to being soluble losses into line. Carbons used in South Africa and North America for gold recoveries are almost exclusively coconut shell-based granular types which are also very popular in Australia. Typically, 6×12 or 6×16 mesh coconut carbons are used in pulp, and 6 x 16 or 12 x 30 mesh are used in columns.

In 1970, the US Bureau of Mines investigated bituminous coal-base carbon for gold adsorption. However it was found that coconut carbons would stand up better in a pulp circuit than other base material carbons. Since coconut carbon was available and worked well, granular carbons from other base materials receives minimal importance.

Selection of activated carbon for gold recovery service includes consideration of:

(a)Presence of other substances that may affect or interfere with loading of carbon (b)

Adsorption capacity(c) Rate of adsorption and desorption (d) Residual gold on stripped carbon.

(e)Resistance to abrasion (f) Reproducibility of test methods (g) Consistency of product for gold recovery service.

Boyce have learned to control adsorption capacity for gold cyanide, providing carbon possessing consistent gold absorption properties. Some users believe that carbons with high adsorption capacity for gold will not strip to low levels. Plant performance is the best proof of how well high capacity/fast loading carbon will strip. Boyce activated carbon is routinely stripped to 20-30 gm/ton in several operating plants. Thus Boyce activated carbon meets all the requirements for gold recovery services.

The product is applied in CIP process and heap leaching by gold extraction and the precious metals extraction, separation of metallurgical industry. It is used the high-quality coconut shell from Hainan as raw material. It is refined by the high temperature steam activation. It has the advantages such as developed pore structure, high specific, surface area, strong adsorption capability, high wear-resistance, and high decolorizing purity, renew ability etc

Boyce would like to prove how to increase your gold yield, and consequently your profits, using a granular activated carbon, or an extruded activated carbon. The granular activated carbon are premium coconut shell-based carbons that are among the best available and have been specially pre-treated to reduce platelet content and initial wear of the carbon, which gives you more carbon for your money. The extruded activated carbon was specifically developed by Boyce to reduce the amount of gold lost during the gold recovery process. It improves plant performance, significantly reducing gold losses to the tailings.

Boyce activated carbon is known for its features of hardness, free of platelets, large pore volume, rapid adsorption and max gold loading, this range exhibits the following advantages: • Low attrition values • Large pores value with selected pore size • Suitable for “carbon in leach”(CIL) and “carbon in pulp” (CIP) process • Available in granular form

Following are the technicalities of this range:

Grade	CTC	Iodine Adsorption	Apparent Density	*Hardness*	pH	Ash	Moisture	Mesh Size
BOYCEGAC	60	1150mgm/gm Min	0.48gm/cc Min	98% Min	9-11	3% Max	5 Max	8 x 16 6 x 12
BOYCE GAC	55	1050mgm/gm Min	0.5gm/cc Min	99% Min	9-11	3% Max	5 Max	8 x 16 6 x 12

Boyce superior granular coconut shell based carbon offers:

• Low initial loses due to pre-wear and reduced platelet content

• High gold loading capacity

• High gold loading kinetics, reducing losses by pre-robbers

• Excellent gold release during stripping

• Excellent screen ability, low pegging

Powder Activated Carbon for Flue Gas Treatment

admin — Mon, 13 Dec 2010 04:47:54 +0000

The incineration of wastes such as municipal waste(MSW),hazardous industrial waste, medical waste and sewerage sludge results in the formation of a flue gas containing a range of pollutants .Methods such as scrubbing, bag filters and electrostatic precipitators (ESP) are used to remove most of these pollutants. However these methods cannot remove dioxins and heavy metals such as mercury and cadmium

Activated carbon injection has been identified as the best available control technology (BACT) for the removal of above said range of pollutants. There are a variety of ways to use activated carbon in flue gas treatment. The best application method depends on the existing pollution abatement system.

Boyce standard range of powder activated carbon (PAC) proved to be an efficient solution for this purposes

Dry Abatement System

Dry powdered activated carbon (PAC) is injected into cooled (<200oC) flue gas. The carbon can be injected in numerous locations, including prior to or after acid gas scrubbing. The overall design is similar to the semi wet/semi-dry abatement equipment except the PAC is injected dry. The used PAC will be collected in the particulate matter (PM) collection device and safely disposed of with the ash. Typically, the usage of activated carbon ranges from 50 to 500 mg per Nm3 of flue gas. Carbon usage rate is highly dependent on the flue gas temperature, available contact time, and the particulate matter collection device.

Semi Dry/Semi Wet Abatement System

Powdered activated carbon (PAC) is injected (dry or as a slurry) into the humidified 130 to 160^oC flue gas stream. Although the contact time in the gas stream is usually less than a second, the contact time is substantially increased by the residence time of the carbon in the particulate matter (PM) removal equipment. The PAC can typically be disposed of as non-hazardous with the other ash. PAC can be added alone or in conjunction with lime used for acid gas treatment. When mixed with lime, some of the PAC or PAC/lime can be re-circulated. Carbon usage rates range from 50 to 500 mg per Nm3.

Wet Scrubber Abatement System

For over 20 years, activated carbon has been used to remove mercury and dioxins from water. In a wet scrubber system, granular (GAC) or powdered (PAC) activated carbon is used to remove dioxins from the scrubber liquid. Powdered carbon is added to the re-circulating liquid, and a small slipstream of solution is continuously purged. Alternatively, the re-circulation scrubber solution is continuously pumped through a GAC bed and purified. When the GAC is saturated and no longer performs as required, the spent carbon must be disposed of in an environmentally safe method.

Powdered activated carbons supplied by Boyce, have been consistently meeting emission discharge standards of 0.5 µg/Nm3 mercury and 0.01 ng/Nm3 T. E .dioxins throughout Europe. In the United States, proposed incinerator facilities and existing incinerator facilities face stringent flue gas discharge requirements. Many facilities are currently using Boyce standard range of powdered carbons for mercury, dioxin, and VOC control. Some local governments and state environmental agencies have already established flue gas treatment objectives prior to upcoming federal regulations.

For flue gas treatment, removal of trace levels of mercury and dioxin is required. To accomplish the adsorption of these micro-pollutants, the adsorbent must have sufficient high energy adsorption sites. Boyce coconut-based powdered activated carbons have a high minimum Iodine Number (measurement of available surface area) with up to twice the amount of high energy adsorption sites when compared to other adsorbent carbons. With proper dosing levels, over 95 percent reduction in mercury/dioxin is achievable.

Have more questions? Please give us a call for multiple sack or pallet orders +9198420 91301 (or) mail@boyce.in.

BOYCE ACTIVATED CARBON SOLUTIONS FOR Decolonization & Amine Purification

admin — Tue, 16 Nov 2010 07:06:30 +0000

REFINING INDUSTRIES

Boyce is uniquely equipped to supply a full range of activated carbon products for variety of applications in refineries. We currently supply best quality of Granular and powder activated carbon for dozens of refineries, offering prompt, expert service. Regulatory compliance and the desire to improve product quality are key drivers for the use of activated carbon in Refineries.

The following discussion highlights these common applications and the solutions that Boyce Carbon can supply.

VOC Treatment & Control

v Sewer pumps / junction boxes

v Covered API separators and DAF units (level changes and diurnal breathing losses) Vacuum truck exhaust

v Wastewater and storm water storage tanks (level changes and diurnal breathing losses)

Boyce activated carbon grades are particularly designed for these applications to be used in carbon adsorption units.

Vapor / Solvent Recovery

Hydrogen Sulfide Removal

Amine Purification

v Improved amine scrubbing efficiency

v Reduced corrosion rate

v Reduced operating costs

Decolorization

Boyce Activated carbon is the perfect choice to remove unwanted color or other organic impurities from desired end products such as jet fuel, kerosene, gasoline, lube oil, and other products.

Specification of our main grade of granular activated carbon for refining industry is given as under. We can customize the iodine value as well as the particle size according to your requirements.

Technical Specification of Boyce Granular Activated Carbon

Properties	Specification
Raw Material	Coconut shell charcoal
Appearance	Black granules
Particle Size	Any sieve size
	4/8, 8/16, 8/30
	8/50, etc
Bulk Density	0.55±0.05 gm/cc
Carbon Tetra Chloride Adsorption	30%
Iodine Adsorption mg/gm	500mg/gm±25
Total Surface Area (min)	500 m²/gm
Ball Pan Hardness No.	95
pH	9 to 10
Ash Content	5% Max
Moisture	5% Max

For more details Please visit www.carbonsuppliers.com . Please feel free to call us on quires +91 9842091301 or mail@boyce.in.

IMPORTANCE OF BOYCE ACTIVATED CARBON AIR FILTER FOR YOUR HVAC SYSTEM

admin — Sat, 30 Oct 2010 05:09:32 +0000

Often referred to as charcoal filters, an activated carbon air filter is the most effective filter for removing the smell from cigarette smoke, chemicals, gases and many other odors from household air. These filters are available often as an option when you purchase media air filters These activated carbon filter pads are installed with your regular filter pads and usually last for two media filter changes.

How Boyce Activated Carbon Air Filters Work

Activated carbon is actually charcoal that has been put through a process that causes millions of pores to form. This increases the surface area of the carbon immensely and creates a very large surface area where gases and particles are trapped. These pores form between the carbon atoms which results in a material that bonds very well with various contaminants.

Natural Fresh Air without Chemicals or Sprays

Installing a carbon air filter in your furnace or air conditioning system is very effective at removing pet, smoke, garbage and mold odor. This reduces the need for unnatural solutions to odor problems and there is no need for chemicals or sprays which can cause allergic reactions.

Carbon filters are often used as pre filters for heating, air conditioning, ventilation and air cleaning equipment. The media part of the air filter removes the dust and the carbon pre filter removes the undesirable smells that can often be very overwhelming.

Carbon air filters are also available in panel filters and can be used as the only filter in the hvac system but are not as efficient as some of your other options. Carbon pre filters are not recommended for use with hepa air filters because hepa filters already have a negative impact on air flow.

Our special manufacturing techniques results in highly porous charcoals that have surface areas of 300-2,000 square metres per gram. Boyce Activated charcoal are good at trapping other carbon-based impurities (“organic” chemicals), as well as things like chlorine. Hence thus makes very suitable to incorporate in all kinds of Activated carbon Filters.

Variety of Activated Carbon Air Filters Where Boyce Activated Carbon is Used
Activated Carbon Pleated Panel Filters - remove particulates, gases and odors.

Chemically Enhanced Carbon Pleated Panel Filters - remove particulates, gases, odors, fumes, acid gases, and Volatile Organic Compounds (VOC´s).

HEGA (High Efficiency Gas Adsorption) Filters - use activated carbon as a major component to remove a wide range of gases and odors in air purification applications.

Carbon Loaded Rigid-Box Filters - remove odors with high efficiency in low concentration applications.

High Mass Zero Dust (HMZD) Panels - are suitable for applications in airports, museums, semiconductor manufacturing, waste water treatment plants and others where carbon dust cannot be tolerated

Refillable Carbon Trays - offer a reduction in replacement cost allowing just the carbon media to be changed out, saving the cost of the filter frame

Carbon V-Bank Filters - offer low-pressure drop, high airflow capacity and excellent gaseous contaminant removal and are ideal for either new or retrofit applications. The entire filter is disposable and the media can be selected based on the specific properties of the contaminants of concern.

Military Carbon Cloth Media - is available in many air purifiers including the Austin Air Allergy Machine. The close weave on the cloth media allows for the trapping of many of the allergy causing contaminants and odor producing elements often passed through by granular carbon medias.

Please free to contact us on quires on mail@boyce.in Or +91 9842091301

Process of recycling in textile industry

admin — Mon, 18 Oct 2010 05:46:22 +0000

Waste water from the textile finishing industry commonly contains moderate concentrations (10-200 mg/l) of dye stuffs, contributing significantly to the pollution of aquatic ecosystems. Various physio-chemical and biological techniques can be employed to remove dyes from waste water. The technical and economic feasibility of each technique is determined by several factors such as dye type, waste water composition, operation costs and generated waste products.

The adsorption technique is superior to other techniques with regard to simplicity of design, initial cost, ease of operation and insensitivity to toxic substances. This technique uses activated carbon and other suitable sorbents. Activated carbon remains the most effective and widely used adsorbent for the decolourisation of waste water from textile industries.

Process of recycling in textile industry using biological activated carbon treatment system

In this bio treatment method, naturally occurring micro organism breakdown materials in the water such as Dissolved Organic Carbon (DOC), Biochemical Oxygen Demand (BOD), turbidity, Total Suspended Solid and nutrient levels and thus improve water quality. The Activated carbon filters are used to provide a place on which these microorganisms grow. Because of the low price of bio treatment, the combination with AC may reduce the overall treatment cost. Finally the biologically activated carbon systems degrade the industrial waste water in a fast and inexpensive way.

There are 2 types of biologically activated carbon systems for waste water treatment in textile industries. In the first type, biological activated carbon (BAC) filter uses granular activated carbon to reduce dissolved organic matter and remove color (20 to 30 mg/L ozone for 0.5 to 1 hour). While in the second, biological activated carbon filter (BAC) uses activated carbon in the form of flexible clothes to reduce dissolved organic matter (20 to 30 mg/L ozone for 0.5 to 1 hour).

The two biological activated carbon treatment systems successfully reduce the levels of BOD₅, COD, DOC, TSS, Color and Turbidity in the wastewater to within the specified guidelines in each trial that is continuously providing high quality recycled water to the entire factory requirements. The improvement of water quality by the two BAC filters under different conditions is tabulated below (Table 1.). Biological oxidation within GAC filters also can be efficient for the removal of inorganic such as ammonia. Ammonia is a toxic chemical which promotes bio-growth and reacts with chlorine. The combined removal of DOC and ammonia leads to a significant reduction of the chlorine demand of the finished water. The amount of DOC removal and oxygen consumption by the two BAC in warm temperature (25-34 ^oC) are much greater than cold temperature (9-17 ^oC.)

Table (1): Removal Efficiency of Two of Biological Activated Carbon Systems.

Parameter	BAC1	BAC2
Biochemical Oxygen Demand after 5 Days, BOD5(mg/L)	75% to 88%	81% to 92%
Chemical Oxygen Demand, COD(mg/L)	68% to 81%	63% to 87%
Dissolved Organic Carbon, DOC(mg/L)	66% to 89%	71% to 93%
Total Suspended Solid, TSS	87% to 94%	61% to 80%
Color(TCU)	More than 80% of the color	More than 81% of the color
Turbidity(NTU)	75% to 88%	68% to 81%

Boyce supplies wide range of activated carbon with an exceptionally high surface area and a high degree of micro porosity makes it very suitable for these textile industries for the removal of dyes in efficient way.

Removal of Proteins and other Organic Impurities

admin — Mon, 11 Oct 2010 04:48:17 +0000

A number of pharmaceutical products can become contaminated in production by proteins or other organic compounds. In order to ensure these products are suitable for use, different grades of activated carbon can be used. Boyce Carbon has a range of high purity powder and granular carbons that are suitable for purification of pharmaceuticals including:

* Amino Acids including: methionine, lysine, mono sodium glutamate (MSG), phenyl alanine, aspartic acid, glycine, methionine

* Blood plasma

* Contrast liquids

* Enzymes

* Folic acid

* Intravenous solution

Boyce granular activated carbon (GAC) is also used in bottled beverage plants. For this purpose we recommend using our ————- product. The granular activated carbon is used as a filter in a vessel through which the water is pumped. The GAC is regularly backwashed and does not need to be replaced.

During the production and preparation of soft drinks, Activated Carbon is used in various stages:

a) Raw water treatment in bottling plants: removal of organic compounds, taste/ odour and residual chlorine

b) Treatment of mixing water in ode fountains (in restaurants etc.): again, removal of organics, chlorine and taste/odour, typically starting from municipal water

c) Purification of carbon dioxide in bottling plants: removal of organic impurities from the available CO2

d) Purification of liquid sugar in bottling plants: removal of color bodies and taste/odour compounds from the sugar syrup which is used as an ingredient in the soft drink preparation

Boyce specialist grades

Boyce carbon supply specialist grades of granulated activated carbon (GAC) for gold mining service all over the world. For gold mining we recommend using our —————product. Highly activated carbon is used in the dissolved gold recovery process, either by introducing it directly into the CIL (carbon-in-leach) tanks or into separate CIP (carbon-in-pulp) tanks after leaching. The activated carbon adsorbs the dissolved gold from the leach slurry thereby concentrating it onto a smaller mass of solids. The carbon is then separated from the slurry by screening and subjected to further treatment to recover the adsorbed gold.

In short, there is no longer any need to struggle trying to find the best price/performance in activated carbon solutions. Boyce has solutions for all problems. Take advantage of the expertise, experience and technical know-how of our specialists….. We are always close at hand!

Just phone your nearest Boyce Sales Team or contact us through our website for one-stop-shopping at Boyce!